Don't you just hate cutting holes in your boat...

Don't you just hate cutting holes in your boat...
I'm installing new CB trunks to accommodate the new center boards and to move them back about 3".

Out go the old.

Vacuum bag laminating table to make flat parts Part 3

Vacuum bag laminating table to make flat parts Part 2

Part 2

Vacuum bag laminating table to make flat parts Part 1

Using a laminating table to make flat parts with a vacuum bag.
I need to make center board trunks for the curved center boards, the easy way for now is to
use 4 mm ply with a fiberglass reinforcement. In this video the underside is got a coat of 5oz glass and a layer of peel ply, purf. poly, and breather mat. At the start I have layed down the glass and am putting a layer of peel ply on.

Curved Center Boards

The boards are now waiting for fairing and painting.

Pouring foam 2

Just a little mis-calculation, too much foam.

Pouring Foam

Pouring foam into centerboard, I am using 8lb per cubic foot.